ViewSonic X10-4K - 3840 x 2160 Resolution 2 400 LED Lumens 0.8 Throw Ratio Use - Page 79
Firmware Update by USB, Firmware Upgrade, By USB, Enter, USB 2, Se²ng, Soſtware Update
View all ViewSonic X10-4K - 3840 x 2160 Resolution 2 400 LED Lumens 0.8 Throw Ratio manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Firmware Update by USB 1. Download the latest version from the ViewSonic website and copy the file to a USB device. 2. Plug the USB into the projector, then go to: Home > Setting > Firmware Upgrade > Software Update By USB. 3. Select Enter by pressing OK on the remote control. 4. The system will detect the Firmware version and display the above dialog message. 5. After selecting Yes, a progress bar will appear as the update process begins. 6. After reaching 100%, the projector will restart and the screen will turn to black for a few minutes. The whole updating process will take about 10 minutes. 7. After updating the Firmware, it will take a few minutes to restart the projector. NOTE: Only the USB 2 (3.0) port can support Firmware updating. (USB format: FAT32) 79