ViewSonic X100-4K - 4K UHD Projector with 2900 LED Lumens Bluetooth Speakers and - Page 74
Manual, Control, Wired LAN Control, Manual IP, Apply, Enter, Se²ng, Network Se²ngs, LAN Se²ngs
![]() |
View all ViewSonic X100-4K - 4K UHD Projector with 2900 LED Lumens Bluetooth Speakers and Wi-Fi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
If you are in a Manual Static IP environment: 1. Take a RJ45 cable and connect one end to the RJ45 Control port of the projector, and the other end to your network. 2. Go to: Setting > Network Settings > Wired LAN Control. 3. Highlight LAN Settings and select Manual IP. 4. Contact your ITS administrator for information on the Projector IP Address, Subnet Mask, Default Gateway, and DNS Server. 5. Using the directional buttons, select the item you want to modify, and press Left/ Right to enter the value. 6. To save, select Apply and press Enter. NOTE: If the RJ45 cables are not properly connected, the Projector IP Address, Subnet Mask, Default Gateway, and DNS Server will display 0.0.0.0. Ensure the cables are properly connected and try the above steps again. 74
![](/manual_guide/products/viewsonic-x1004k-user-guide-694140e/74.png)