ViewSonic XG341C-2K User Guide English - Page 5
W x H, Interface Pad, W x H x D, Pad Hole, rotation angle of the device.
View all ViewSonic XG341C-2K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
• Fastening the display to a wall or fixed object using cordage or other restraining devices can help support the weight of the display in order to prevent the display from falling over. Hole pattern (W x H) 100 x 100 mm Interface Pad (W x H x D) 115 x 115 x 2.6 mm Pad Hole Screw Specification & Quantity Ø 5 mm M4 x 10 mm 4 pieces or VESA wall mounƟng hole NOTE: • Restraining device/cordage should be able to withstand 100N force. • Make sure the cordage is straightened, and any slack is removed. The back of the device shall face the wall to ensure the device cannot tilt under external force. • Make sure the display does not tilt under external force at any height and rotation angle of the device. • If the existing display is going to be retained and relocated, the same considerations as above should be applied. 5