Viking AD52820 Installation Instructions - Page 2
IMPORTANT - Please Read and Follow
![]() |
View all Viking AD52820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
IMPORTANT - Please Read and Follow •Before beginning, please read these instructions completely and carefully. •The installer should leave these instructions with the consumer for future reference. UNPACK 1. Locate the unit near installation area. 2. Remove all banding from around carton. 3. Remove all tape and packaging material from the outside and inside of the access doors or storage drawer. 4. Keep all carton packaging until your access doors or storage drawers have been thorougly inspected and found to be in good condition. CUTOUT OUT DIMENSIONS Access Doors *Before centering doors in opening, make the notches in all four corners for double access doors and only in the hinge side for single access doors. The notches need to be 1" (2.5 cm) long x 2" (5.1 cm) wide. Attach with the four screws that are provided. B For Single Access Doors only (AD51620): Only notch the side where the hinge is located. Door can be mounted with left or right door swing. (5.12"cm) A (2.51"cm) Notch* AD52820 A (includes notches) B (opening only) 28-1/4" (71.8 cm) Min. 30-1/4" (76.8 cm) Max. 20-1/4" (51.4 cm) Min. 20-1/2" (52.1 cm) Max AD51620 16-1/4" (41.3 cm) Min. 18-1/4" (46.4 cm) Max. 20-1/4" (51.4 cm) Min. 20-1/2" (52.1 cm) Max (21."54mcmin.) Storage Drawers E SD5300 SD5301 SD5360 SD5361 C 28" (71.1 cm) 33-3/4" (85.7 cm) D D 9-1/4" (23.5 cm) 9-1/4" (23.5 cm) E 23-3/8" (59.4 cm) 23-3/8" (59.4 cm) C NOTE: Storage drawers (SD5300 / SD5301 / SD5361 / SD5360) must have cabinet side walls for mounting screws. 2
![](/manual_guide/products/viking-ad51620-installation-instructions-4a17e47/2.png)