Viking Available 2022 Installation / Use and Care Instructions - Page 2

Table of Contents, Important

Page 2 highlights

Table of Contents Warnings & Important Safety Instructions 2 Dimensions 4 Specifications 5 Clearance Dimensions (Proximity to Cabinets 6 Clearance Dimensions (Wood/Composite Overlay 7 Electrical Requirements 8 General Information 9 Installation 10 Door Removal 10 Leg Installation 10 Electrical Connection (3-wire 11 Electrical Connection (4-wire 12 Leveling/Adjustments/Alignment 13 Anti-tip Device Installation 14 Final Installation 16 Door Replacement and Adjustment 16 Performance Checklist 17 Final Preparation 18 Service & Registration 18 Important -Read and Follow! • Before beginning, please read these instructions completely and carefully. • Do not remove permanently affixed labels, warnings, or plates from product. This may void the warranty. • All local and national codes and ordinances must be observed. Installation must conform with local codes or in the absence of codes, the National Fuel Gas Code ANSIZ223.1/NFPA-54 -latest edition. • The installer must leave these instructions with the consumer who should retain for local inspector's use and for future reference. In Canada: Installation must be in accordance with the current CSA C22.1 Canadian Electrical Codes Part 1 and/or local codes. 2

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20

2
Warnings & Important Safety Instructions ____________________________________________________2
Dimensions______________________________________________________________________________4
Specifications ____________________________________________________________________________5
Clearance Dimensions (Proximity to Cabinets)
________________________________________________6
Clearance Dimensions (Wood/Composite Overlay)_____________________________________________7
Electrical Requirements ___________________________________________________________________8
General Information
______________________________________________________________________9
Installation _____________________________________________________________________________10
Door Removal____________________________________________________________________10
Leg Installation___________________________________________________________________10
Electrical Connection (3-wire)
______________________________________________________11
Electrical Connection (4-wire)
______________________________________________________12
Leveling/Adjustments/Alignment ___________________________________________________13
Anti-tip Device Installation _________________________________________________________14
Final Installation
_________________________________________________________________16
Door Replacement and Adjustment
_________________________________________________16
Performance Checklist
___________________________________________________________________17
Final Preparation ________________________________________________________________________18
Service & Registration____________________________________________________________________18
Before beginning, please read these instructions completely and carefully.
Do not remove permanently affixed labels, warnings, or plates from product. This may void the warranty.
All local and national codes and ordinances must be observed. Installation must conform with local codes or
in the absence of codes, the National Fuel Gas Code ANSIZ223.1/NFPA-54 –latest edition.
The installer must leave these instructions with the consumer who should retain for local inspector’s use and
for future reference.
In Canada: Installation must be in accordance with the current CSA C22.1 Canadian Electrical Codes Part 1
and/or local codes.
Table of Contents
Important
–Read and Follow!