Viking Available 2022 36 inchW. Countertop Rear Trim - P36CRT - Installation I - Page 2
Caution
View all Viking Available 2022 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Installation (Side Trim) For Models: R24CSTSS - 24" D. VGIC Open Burner Ranges 1. Remove the outside grates and grate supports next to the counter. 2. Locate and remove the screws holding the grate support side trim in place. Keep the screws for reuse. 3. Lift the grate support side trim out. It will not be reinstalled. 4. Locate and remove the screws holding the heat shield in place. Keep the screws for reuse. 5. Lift the heat shield out and set aside for reuse. 6. Place the countertop side trim into place. Align with the countertop and the landing ledge. Replace and secure with the original screws. 7. Replace the heat shield and align the slotted screw holes with the screw holes in the side trim. Replace and secure with the original screws. CAUTION The heat shield must be replaced only if it is part of the original product. 8. This countertop side trim was designed to accommodate most installations. If the trim needs to be shorter, cut at the rear to fit. 2 Grate support side trim (standard with product) Heat shield (not on all products) Countertop side trim (optional accessory) Heat shield (not on all products)