Viking BVGRC8366BWSS Stainless Steel Surface Burner Grate - BSGR1 - Installati - Page 4
Curb Bases
![]() |
View all Viking BVGRC8366BWSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Curb Bases STANDARD CURB BASE FRONT 1. The standard curb base front (A) is completely assembled. 2. Remove the assembly from the carton and simply clip onto the front range legs. 3. The assembly is adjustable about 2" (5.1 cm) front to back so that alignment with the cabinet toe front is possible. Loosen brackets on each side, but allow snug fit. Clip assembly onto range legs; determine front to back setting; remove, tighten bolts, and reattach. Curb Bases CUSTOM CURB BASE FRONT 1. Remove the standard curb base front assembly from the carton. 2. Remove the front (A) from the mounting assembly (B). 3. Attach locally supplied front (C) to the mounting assembly (B) and simply clip onto the front range legs. Important Note: The locally supplied front must not be any taller than 3-1/8" (7.9 cm) tall. Fronts taller than 3-1/8" (7.9 cm) could obstruct the airflow. 4. The assembly is adjustable about 2" (5.1 cm) front to back so that alignment with the cabinet toe front is possible. Loosen brackets on each side, but allow snug fit. Clip assembly onto range legs; determine front to back setting; remove, tighten bolts, and reattach. A Alternate Curb Base View for Custom Ranges Important Note: The range must be installed as specified in the range installation guide for proper airflow when using the standard curb base. 6 B C Important Note: The range must be installed as specified in the range installation guide for proper airflow when using the custom curb base. 7
![](/manual_guide/products/viking-bvgrc8366bwss-stainless-steel-surface-burner-grate-bsgr1-installation-instructions-8abe4ae/4.png)