Viking DFWB300R Specs - Page 6

REFRIGERATION, Installation Requirements

Page 6 highlights

UTILITY REQUIREMENTS REFRIGERATION Built-In 30"W. Full-Height Wine Cellar Installation Requirements ACCESS REQUIREMENTS GAS Not applicable ELECTRICAL • Three-wire cord with grounded three-prong plug attached to product • 115 VAC/60 Hz; 15 amp dedicated circuit • Maximum amp usage-2.0 PLUMBING Not applicable VCWB300 Professional DDWB301 Designer DFWB300 Custom Panel See Custom Panels section for more information and additional specifications. 2" x 4" Mounting Board (1-1/2" (3.8 cm) x 3-1/2" (8.9 cm)) Attached to anti-tip mounting bracket Note: If unit is installed deeper than 24" (61.0 cm), then shim behind anti-tip bracket thickness by the same amount 3-1/2" (8.9 cm) 1-1/2" (3.8 cm) 8-1/4" (20.9 cm) Anti-tip mounting brackets attached to wall studs 4" (10. cm) Electrical outlet location 84-1/16" (213.5 cm) max. anti-tip board and opening height 82-7/8" (210.5 cm) min. anti-tip board and opening height 73-3/4" (187.3 cm) 24" (61. 0 cm) Professional/Designer 25" (63.5 cm) Custom Panel 29-1/2" (74.9 cm) Professional 30" (76.2 cm) Designer/Custom Panel VCWB300 DDWB301 Cutout width 29-1/2" (74.9 cm) 30" (76.2 cm) Cutout height 82-7/8" (210.5 cm) min. to 84-1/16" (213.5 cm) max. Cutout depth 24" (61.0 cm) 24" (61.0 cm) *Can be installed in 24"-deep (61.0 cm) openings; door faces and top grille will protrude 3/4" (1.9 cm) into room. DFWB300 30" (76.2 cm) 25" (63.5 cm)* PLANNING AND DESIGN GUIDE VIKINGRANGE.COM • 1-888-VIKING1 RELEASED 7/14/10 © 2 0 1 0 V R C - INFORMATION SUBJECT TO CHANGE

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7

REFRIGERATION
Built-In 30”W. Full-Height Wine Cellar
PLANNING AND DESIGN GUIDE
VIKINGRANGE.COM
1-888-VIKING1
RELEASED 7/14/10
© 2 0 1 0 V R C — INFORMATION SUBJECT TO CHANGE
UTILITY
REQUIREMENTS
GAS
Not applicable
ELECTRICAL
• Three-wire cord
with grounded
three-prong plug
attached to
product
• 115 VAC/60 Hz;
15 amp
dedicated circuit
• Maximum amp
usage—2.0
PLUMBING
Not applicable
Installation Requirements
29-1/2” (74.9 cm) Professional
30” (76.2 cm) Designer/Custom Panel
82-7/8” (210.5 cm) min.
anti-tip board and opening
height
73-3/4”
(187.3 cm)
1-1/2”
(3.8 cm)
3-1/2”
(8.9 cm)
84-1/16” (213.5 cm) max.
anti-tip board and opening
height
2” x 4” Mounting Board (1-1/2” (3.8 cm) x 3-1/2” (8.9 cm))
Attached to anti-tip mounting bracket
Note:
If unit is installed deeper than 24” (61.0 cm), then
shim behind anti-tip bracket thickness by the same amount
8-1/4”
(20.9 cm)
24” (61. 0 cm) Professional/Designer
25” (63.5 cm) Custom Panel
Electrical
outlet
location
Anti-tip mounting
brackets attached
to wall studs
4”
(10. cm)
ACCESS REQUIREMENTS
VCWB300
DDWB301
DFWB300
Cutout width
29-1/2” (74.9 cm)
30” (76.2 cm)
30” (76.2 cm)
Cutout height
82-7/8” (210.5 cm) min. to 84-1/16” (213.5 cm) max.
Cutout depth
24” (61.0 cm)
24” (61.0 cm)
25” (63.5 cm)*
*Can be installed in 24”-deep (61.0 cm) openings; door faces and top grille will protrude 3/4” (1.9 cm) into room.
VCWB300
Professional
DDWB301
Designer
DFWB300
Custom Panel
See
Custom Panels
section for
more information and additional
specifications.