Viking FDSB5483 Use and Care Manual - Page 12
Freezer, Automatic Ice Maker
View all Viking FDSB5483 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Freezer Wire Shelf Adjustment You can easily adjust your freezer's shelves. To remove a shelf, simply tilt it up at the front, releasing the hooks from the shelf support. Then, pull the shelf straight out. To replace, guide the rear hooks of the shelf into the slots in the shelf supports. Then, tilt the shelf up at the front until the hooks drop into the slots. Next, lower the front of the shelf to a level position. Automatic Ice Maker The ice maker and slide-out ice drawer on your refrigerator are not adjustable, but the ice drawer slides forward for easy access to ice. After the refrigerator reaches normal temperature, the ice maker fills with water and begins operating. Under normal conditions, the ice maker will produce seven to nine batches of ice per 24 hour period. Note: Allow 24 to 48 hours after installation before looking for ice in your ice drawer. You should discard the first three full drawers of ice produced by your refrigerator, and should also throw out the first drawer full of ice your refrigerator produces after extended periods of non-use. On Position During ice production, the ice maker arm raises and lowers. When the ice bin is full, the ice maker arm automatically turns the ice maker off. To manually stop ice production, raise the ice maker arm. You will hear a definite click when you have the arm in the right position. The ice maker won't produce any more ice until you lower the ice maker arm. Ice Maker Arm Off Position CAUTION To avoid damage to ice maker, observe the following: • DO NOT force ice maker arm down or up past stop position. • DO NOT place or store anything in ice bucket. Operation 12