Viking FDW100 Use and Care Manual - Page 12

Operation Operating the Dishwasher CAUTION Avoid opening the door during the wash cycle. This interrupts the washing process, and hot steam will escape. Hot steam can cause burns and other serious injuries. When the door is closed, the program will continue. Function Buttons The combination of high temperatures and dishwasher detergent may cause damage to some items if they are washed in the dishwasher. Remember, if there is any doubt about any aspect concerning items to be washed in the dishwasher, follow the instructions from the manufacturer of the items, or wash the items by hand. On/Off Button on Turn the dishwasher on with the On/Off button. When off turning on, the icon on the display of the last used program will light up. Program Selection Button P Use the Program Selection button to select the desired program. The icon of the corresponding program will light up. Refer to "Table of Program Data and average Consumption Values" to select a program suitable for your dishes. select the desired program with Program Selection button. ½ Half Load/Tablet Detergent Button Half Load/Tablet Detergent button allows you to turn on and off the Half Load and Tablet Detergent functions of your machine. Half Load Function If you want to run your machine without loading it completely, place your dishes into the machine as you desire. Press On/Off button to turn on your machine. Press the Half Load/Tablet Detergent button after selecting the desired program until Half Load Indicator lights up, then press Start/Pause/Cancel button and close the door of your machine. With the Half Load option you can use every part of your lower and upper baskets and save water and energy. 22 Operating the Dishwasher Tablet Detergent Function Depending on the hardness level of the tap water, the Tablet Detergent function allows obtaining a better drying performance from the multi-purpose detergents such as 2in1, 3in1, 4in1, 5in1, etc., called as all-in-one detergents. Tablet Detergent Indicator lights when the Tablet Detergent function is selected. Salt and Rinse agent indicators turn off when this function is activated. Turn on your machine by pressing the On/Off button to use the Tablet Detergent function. Press the Half Load/Tablet Detergent button after selecting the desired program until Half Load Indicator lights up, then press Start/Pause/Cancel button and close the door of your machine. To use the Half Load and Tablet Detergent functions concurrently, turn on your machine by pressing the On/Off button and then press the Half Load/Tablet Detergent button until Half Load and Tablet Detergent Indicators illuminate together. WARNING If you have used the Half Load or Tablet Detergent features during the last program you used, Half Load or the Tablet Detergent function will remain active in the next washing program you will select. If you do not want to use these functions in the new program you have selected, press the Half Load/Tablet Detergent button until the indicator of the relevant function turns off. RESET 3 sec. Start/Pause/Cancel Button Use this button to start the selected program. when the button is pressed once, the light on the button will turn on. Stop the program with the Start/Pause/Cancel button. Remaining Time Indicator/Delay Time Indicator You can follow the remaining program duration from the time indicator display. 23 Operation