Viking FDWU524 Use and Care Manual - Page 24

Filling The Dishwasher Salt, Dispenser, Care And Maintenance

Page 24 highlights

C If you move your dishwasher to another house, it is necessary to readjust water hardness level of your machine by considering the information given above according to the hardness level of the supply water in your new location. Your machine will display the most recently adjusted water hardness level. 9. FILLING THE DISHWASHER SALT DISPENSER (Select Models) Water softening system needs to be regenerated in order for the unit to operate with the same performance continuously. Dishwasher salt is used for this purpose. C Use only special softening salts produced particularly for the dishwashers in your machine. C It is recommended to use granule or powder softening salts in the water softening system. Do not use salts that do not completely dissolve in water such as table salt or rock salt. Otherwise the performance of the system may deteriorate in time. C Salt reservoir will be filled with water when you start the product. For this reason, add salt before operating the machine. 1. Take the lower basket out to add softening salt. 2. Turn the salt reservoir lid counter-clockwise to open it (A, B). 4. Fill the salt reservoir with salt by using the salt funnel (D). To speed up dissolution rate of salt in water, stir it with a spoon. C You can put about 4.4 Pounds of softening salt into the salt reservoir. 5. Replace the lid and tighten it when the reservoir is full. C You need to add salt right before starting the machine. Thus, the overflowing salty water will be flushed immediately, preventing the risk of corrosion in machine. In cases where you would not start washing immediately, run your machine empty in the shortest program. C Since different salt brands in the market have different particle sizes and since the water hardness may vary, dissolution of the salt in water may take a couple of hours. Therefore, Salt Indicator remains on for a while after adding salt into the machine. 3. Add 4 cups of water to salt reservoir of your machine only in initial use (C). 10. CARE AND MAINTENANCE A WARNING:Before cleaning or carrying out maintenance, switch off the appliance, disconnect the power supply and turn off the water tap. A WARNING:Do not repair or replace any part of the dishwasher or attempt any servicing unless specifically recommended by this manual. We recommend that the dishwasher only be repaired by an authorized service agent. A CAUTION :To avoid the possibility of slipping, keep the floor around the dishwasher clean and dry. Keep your appliance free from the accumulation of combustible materials, such as lint, rags, and chemicals. If the dishwasher is not in use for an extended period of time, we recommend you check that the baskets are empty, leave the inside of the dishwasher clean, the door cracked open to allow air to circulate, turn off both the power and water supply to the dishwasher. 24 USA

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

24
USA
C
If you move your dishwasher to another house,
it is necessary to readjust water hardness level
of your machine by considering the information
given above according to the hardness level
of the supply water in your new location. Your
machine will display the most recently adjusted
water hardness level.
4.
Fill the salt reservoir with salt by using the salt funnel
(D). To speed up dissolution rate of salt in water, stir it
with a spoon.
C
You can put about 4.4 Pounds of softening
salt into the salt reservoir.
5.
Replace the lid and tighten it when the reservoir is full.
C
You need to add salt right before starting the
machine. Thus, the overflowing salty water
will be flushed immediately, preventing the
risk of corrosion in machine. In cases where
you would not start washing immediately, run
your machine empty in the shortest program.
C
Since different salt brands in the market have
different particle sizes and since the water
hardness may vary, dissolution of the salt in
water may take a couple of hours. Therefore,
Salt Indicator remains on for a while after
adding salt into the machine.
9. FILLING THE DISHWASHER SALT
DISPENSER
(Select Models)
Water softening system needs to be regenerated in
order for the unit to operate with the same performance
continuously.
Dishwasher salt is used for this purpose.
C
Use only special softening salts produced
particularly for the dishwashers in your
machine.
C
It is recommended to use granule or powder
softening salts in the water softening system.
Do not use salts that do not completely
dissolve in water such as table salt or rock
salt.
Otherwise the performance of the
system may deteriorate in time.
C
Salt reservoir will be filled with water when
you start the product.
For this reason, add
salt before operating the machine.
1.
Take the lower basket out to add softening salt.
2.
Turn the salt reservoir lid counter-clockwise to open it
(A, B).
3.
Add 4 cups of water to salt reservoir of your machine
only in initial use (C).
10. CARE AND MAINTENANCE
A
WARNING:
Before cleaning or carrying
out maintenance, switch off the appliance,
disconnect the power supply and turn off the
water tap.
A
WARNING:
Do not repair or replace any part
of the dishwasher or attempt any servicing
unless specifically recommended by this
manual. We recommend that the dishwasher
only be repaired by an authorized service
agent.
A
CAUTION :
To avoid the possibility of slipping,
keep the floor around the dishwasher clean
and dry.
Keep your appliance free from the
accumulation of combustible materials, such
as lint, rags, and chemicals.
If the dishwasher is not in use for an extended
period of time, we recommend you check that
the baskets are empty, leave the inside of the
dishwasher clean, the door cracked open to
allow air to circulate, turn off both the power
and water supply to the dishwasher.