Viking MVDOE630SS Installation Instructions - Page 2

Table of Contents Warnings & Important Safety Information 2 Dimensions 4 Specifications 5 Cutout Dimensions 6 Standard 6 Integrated 7 Flush 8 Electrical Requirements 9 General Information 9 Installation 10 Final Preparation 13 Performance Checklist 13 Service & Registration 14 • Before beginning installation, read these instructions thoroughly and carefully. • DO NOT install single or double wall ovens side by side or stacked one on top of the other. • DO NOT remove permanently affixed labels, warnings or plates from the product as this may void the warranty. • Observe all local and national codes, requirements and ordinances. • Installation must conform with local codes or in the absence of codes, the National Electrical Code, ANSI/NFPA-70 - latest edition, or Canadian Electrical Code, CSA C22.1-1982 and C22.2 No. 01982 - latest edition, National Fuel Gas Code ANSIZ223.1/NFPA-54 - latest edition and all local codes and ordinances. • IN MASSACHUSETTS: This appliance must be installed by a Massachusetts licensed plumber or electrician. • IN CANADA: Installation must be in accordance with the current CSA C22.1 Canadian Electrical Codes Part 1 and/or local codes. • Installers should leave these instructions with the consumer who should retain them for the local inspector's use and for future reference. IMPORTANT - Please Read and Follow Your safety and the safety of others is very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to hazards that can kill or hurt you and others. All safety messages will be preceded by the safety alert symbol and the word "DANGER,""WARNING" or "CAUTION."These words mean: Site Preparation: It is recommended that a thorough site inspection be conducted PRIOR to unpacking and moving this appliance. 2