Viking RDSOE306SS Installation Instructions - Page 9
Performance Checklist
View all Viking RDSOE306SS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Performance Checklist A qualified installer should carry out the following checks: h Check oven Bake Function-bake element on full power, center and outside broil elements at partial power. Convection Bake function-bake and broil elements the same with the convection fan "ON". h Check TruConvec™ function-TruConvec element (behind convection fan cover) "ON" and convection fan "ON". h Check High Broil function-both broil elements at full power. Convection broil function is the same with convection fan "ON". h Check Medium Broil function-inner and outer broil elements pulse on and off. h Check Low Broil function-inner broil element only. h Check Self-Clean function-Door will lock in approximately 30 seconds, the center and outside broil elements will turn "ON" and the bake element will turn "ON" at partial power. Check broil elements through window to make sure they are "ON", then abort self-clean cycle to unlock door. CAUTION DO NOT run self-clean cycle check for more than 10 minutes with the oven racks and rack supports inside oven to avoid discoloration due to the high temperature. Any adjustments necessary that are a result of the installer not following instructions will be the responsibility of the installer, dealer, or the end user of the product. 16 Performance Checklist (cont.) Viking D3 Self-Clean Indicator Light Electronic Timing Center Temperature Control Off/On Indicator Light Interior Oven Function Selector Oven Light Control 17