Viking RDWHC3042SS Use and Care Manual - Page 4

Getting Started Getting Started Table of Contents Getting Started Before Using Hood 7 Features 7 Heat Sensor Thermostat 7 Product Controls/Operation Settings and Functions 8 RDWHC Model Operation 8 Product Care Cleaning and Maintenance 9 Mesh Filters 10 Charcoal Filters 10 Hood Canopy 11 Enamel Finish 11 Stainless Steel Finish 11 Light Bulbs 12 Service Information 13 Warranty 14 Before Using Hood Although the hood is cleaned upon completion of the manufacturing process, you will probably need to clean your hood again after installation. Wipe the surface of the hood with a good household cleaner applied with a soft cloth, or stainless steel polish, depending on the finish of your hood. This will leave a protective finish on the hood. Features Heat Sensor Thermostat Your hood is equipped with a heat sensor thermostat. The thermostat will turn on or speed up the blower if it senses excessive heat above the cooking surface. When the sensor activates, the letters "HOT" will appear on the display. If the blower is OFF - the sensor turns the blower on to HIGH speed. If the blower is on at a lower speed setting - the sensor turns the blower up to HIGH speed. When the temperature level drops to normal, the blower will return to its original setting and the display will be cleared. CAUTION If the power to the hood is not disconnected during cleaning, the heat sensor thermostat can cause the blower to turn on. 6 7