Viking VCBB363RSS Additional Installation Instructions - Page 2
Using the side panel support holes as a template, drill 7 holes
 |
View all Viking VCBB363RSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Side Panel Support Instructions Viking Part Number-F90752 NOTE: The Side Panel Support is manufactured to fit on the left rear corner of the unit. The Side Panel Support should be aligned with the rear of the unit. Side panel support aligned with rear of the unit 2) Using the side panel support holes as a template, drill (7) holes into the side of the unit with a 9/64" (.36 cm) diameter drill bit. 3) Attach side panel support to the unit with #8 sheet metal screws provided. Released-1/20/2005, Revision-1 Page 2
-
1 -
2 -
3 -
4
 |
 |
Side Panel Support Instructions
Viking Part Number-F90752
Released-1/20/2005, Revision-1
Page 2
NOTE:
The Side Panel Support is manufactured to fit on the left rear
corner of the unit.
The Side Panel Support should be aligned with the
rear of the unit.
2)
Using the side panel support holes as a template, drill (7) holes
into the side of the unit with a 9/64” (.36 cm) diameter drill bit.
3)
Attach side panel support to the unit with #8 sheet metal screws
provided.
Side panel support aligned with rear of the unit