Viking VCFB530LSS Installation Instructions - Page 29

Hinge Adjustment

Get Viking VCFB530LSS PDF manuals and user guides View all Viking VCFB530LSS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

Hinge Adjustment 5 2 1 Remove 4 side screws and remove unit top. 7 1 2 Replace unit top. Replace 4 side screws. 8a 6 Front of unit 2 1 3 Loosen the 4 hinge screws. Adjust door. Retighten 4 hinge screws. 8b Wall 2x4 Refrigerator Attach a single 2 x 4 to wall stud (refer to dimensions page for exact location). Wall 2x4 Refrigerator If needed, depending on cabinet and depth, attach second 2 x 4 to first 2 x 4. 56 9 10a 3" Plug in power cord to verify operation. Note: Make sure power switch and showroom switch are in the "On" Position. 10b Place unit within 3" of being flush with cabinets. Note: To avoid cabinet damage, place cardboard between cabinets and unit. When moving unit, do not crimp, kink or crush water supply line. 11 Carefully move unit until semi flush with cabinet (depending on unit). 12 Pull supply tubing forward under unit. Note: DO NOT use plastic water lines. 13 Flush water line by running two quarts of water into a bucket. Turn water off. Connect supply tube to water valve using a 1/2" wrench. Note: DO NOT overtighten. 57

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
57
56
56
Remove 4 side screws and remove unit top.
Loosen the 4 hinge screws. Adjust door.
Retighten 4 hinge screws.
Replace unit top. Replace 4 side screws.
Attach a single 2 x 4 to wall stud (refer to dimensions
page for exact location).
If needed, depending on cabinet and depth,
attach second 2 x 4 to first 2 x 4.
2
1
5
Front of unit
2
1
3
6
1
2
7
8a
Wall
2x4
Refrigerator
8b
Wall
2x4
Refrigerator
Hinge Adjustment
9
3”
3”
3”
10a
Plug in power cord to verify operation.
Note:
Make sure power switch and showroom switch
are in the “On” Position.
Place unit within 3” of being flush with cabinets.
Note:
To avoid cabinet damage, place cardboard
between cabinets and unit. When moving unit, do not
crimp, kink or crush water supply line.
10b
11
Carefully move unit until semi flush with cabinet
(depending on unit).
Pull supply tubing forward under unit.
Note:
DO NOT use plastic water lines.
12
13
Flush water line by running two quarts of water
into a bucket. Turn water off.
Connect supply tube to water valve using
a 1/2” wrench.
Note:
DO NOT overtighten.