Viking VCFF036SS Specs - Page 4
REFRIGERATION, Installation Requirements - energy guide
![]() |
View all Viking VCFF036SS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
UTILITY REQUIREMENTS REFRIGERATION Freestanding 36"W. French-Door Bottom-Mount Refrigerator/Freezer Installation Requirements ACCESS REQUIREMENTS GAS Not applicable ELECTRICAL • Three-wire cord with grounded three-prong plug attached to product. Do not use an extension cord or adapter plug for a two-prong receptacle-call a qualified electrical installer. o 115V/60 Hz; 15 amp dedicated circuit o Maximum amp usage-7.9 o Estimated energy usage- 451 kWh/year VCFF136 Professional DDFF136 Designer 70-1/2" (179.1 cm) cutout without addition of tops/grilles 72" (182.9 cm) cutout with addition of tops/grilles 36" (91.4 cm) 26" (66.0 cm) 36" (91.4 cm) 42" (106.7 cm) 20" (50.8 cm) 14" (35.6 cm) 20" (50.8 cm) Recommended receptacle location Water line location 26" (66.0 cm) PLUMBING • Inlet waterline requirements- 1/4" copper tubing o 35 psi min.; 100 psi max. 24" (61.0 cm) min. When installing into a cutout, the edge of the door must be 2-7/8" (7.3 cm) from the adjacent countertop cabinet. Allow 1/2" (1.3 cm) space at top and 1/2" (1.3 cm) behind the machine compartment cover (located in the rear) for proper air circulation. Sub-flooring or floor coverings (i.e. carpet, tile, wood floors, rugs) may make your opening smaller than anticipated. Some clearance may be gained by using the leveling procedure under Leveling in the Installation Guide. Cutout width Cutout height Addition of tops/grilles Cutout depth All models 36" (91.4 cm) 70-1/2" (179.0 cm) 72" (182.9 cm) 24" (61.0 cm) PLANNING AND DESIGN GUIDE VIKINGRANGE.COM • 1-888-VIKING1 REVISED 5/2/11 ©2011 VRC-INFORMATION SUBJECT TO CHANGE
![](/manual_guide/products/viking-vcff036ss-specs-ba30142/4.png)