Viking VCFF036SS Side Panel Kit Instructions - Page 4

12 2 13 1 Remove adhesive backing from the side panel. Fit the side panel to the front of the unit first. With a center hinge, the side panel will have a cutout. 14 2 1 Pull the machine cover off and slip back of side panel between refrigerator cabinet and machine cover. Install machine cover screws back into refrigerator cabinet. NOTE: The holes on the side panel are clearance holes. 15 2 Remove adhesive backing from other side panel. Fit the side panel to the front of the unit first. Spacer on top of side panel needs to sit on top of refrigerator cabinet. 16 Pull the machine cover and slip back of side panel between refrigerator cabinet and machine cover. Install machine cover screws back into refrigerator cabinet. NOTE: The holes on the side panel are clearance holes. 17 French Door and Side-by-Side Dispenser Models only Install machine cover screws back into refrigerator cabinet. NOTE: The holes on the side panel are clearance holes. Feed wire harness and ground wire through the bottom of the endcap and out through the hole in the rear of the grille. 4