Viking VCFF236SS Installation Instructions - Page 2
IMPORTANT, Table of Contents - used
View all Viking VCFF236SS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Table of Contents Warnings & Important Information 3 Professional Dimensions (36" Bottom-Mount & French Door Bottom-Mount 6 Specifications (36" Bottom-Mount & French Door Bottom-Mount 7 Professional with grille/side panels/top Dimensions (36" French Door Bottom-Mount 8 Specifications (36" French Door Bottom-Mount 9 Proper Disposal 10 General Information 11 Remove the Packaging 11 Location Requirements 11 Moving Refrigerator 12 Electrical Requirements 12 Water Supply Requirements 13 Door & Drawer Removal Remove and Replace Handles 14 Remove Doors and Hinge 14 Replace Doors and Hinge 15 Remove and Replace Freezer Drawer 15 Replace Drawer Front 15 Installation Water Supply Requirements 16 Connect the Water Supply 16 Connect the Water Line 16 Leveling 18 Door Alignment 19 Complete Installation 19 Performance Checklist 20 Service & Registration 21 2 IMPORTANT- Please Read and Follow It is the customer's responsibility to: • Contact a qualified electrical installer. • Read all instructions before using the refrigerator. • Observe all local codes and ordinances. Install refrigerator according to installation instructions. All connections for water, electrical power and grounding must comply with local codes and be made by licensed personnel when required. • DO NOT modify plug on power cord. If plug does not fit electrical outlet, have proper outlet installed by a qualified technician. Replace worn power cords and/or loose plugs. • Assure that the electrical installation is adequate and in conformance with the National Electrical Code, ANSI/NFPA 70-latest edition or Canadian Electrical Code C22.1-1998 and C22.2 No. 0-M91 (or latest edition), and all local codes and ordinances. (115 volt, 60-Hz, 15 amp, fused, electrical supply is required. It is required that a separate circuit serving only this appliance be provided. This appliance is equipped with a power supply cord having a 3-prong grounding plug. To minimize possible shock hazard, the cord must be plugged into a mating 3-prong, grounding type wall receptacle. If a 2-prong receptacle is encountered, the customer must contact a qualified electrical installer to have it replaced with a properly grounded 3-prong receptacle. DO NOT use an extension cord or adapter plug. • DO NOT ground to a gas line or coldwater pipe. • DO NOT remove warning tag from power cord. • Refrigerator is designed to operate on a separate 115 volt, 15 amp., 60 cycle line. • DO NOT tamper with refrigerator controls. • DO NOT service or replace any part of refrigerator unless specifically recommended in Use & Care or Installation Instructions. DO NOT attempt service if instructions are not understood or if they are beyond personal skill level. • ALWAYS disconnect refrigerator from electrical supply before attempting to change light bulbs, clean, or service the refrigerator. Disconnect the power cord by grasping the plug, not the cord. • ALWAYS read and follow manufacturer's storage and ideal environment instructions for items being stored in refrigerator. • DO NOT allow children to operate, play with, crawl inside or stand on any part of the refrigerator. • DO NOT clean refrigerator parts with flammable fluids. The fumes can create a fire hazard or explosion. • Clean up spills or water leakage associated with water installation. • Keep your refrigerator in good condition. Bumping or dropping refrigerator can damage refrigerator or cause refrigerator to malfunction or leak. If damage occurs, have refrigerator checked by qualified service technician. 3