Viking VDSC536T Installation Instructions - Page 2

Table of Contents Warnings & Important Safety Instructions 3 Dimensions 6 Specifications 8 Clearance Dimensions (Proximity to Cabinets 10 Clearance Dimensions (Wood/Composite Overlay 11 Electrical & Gas Requirements 12 General Information 14 Installation 15 Door Removal 15 Leg Installation 16 Electrical Connection (3 Wire 17 Electrical Connection (4 Wire 19 Leveling/Adjustments/Alignment 21 Anit-tip Device Installation 22 Connecting Gas & Electrical 23 Standoff Bracket Removal 24 Final Installation 24 Door Replacement and Adjustment 25 Final Preparation 26 Performance Checklist 26 Service & Registration 27 2 IMPORTANT-Read and Follow! • Before beginning, please read these instructions completely and carefully. • DO NOT remove permanently affixed labels, warnings, or plates from product. This may void the warranty. • All local and national codes and ordinances must be observed. Installation must conform with local codes or in the absence of codes, the National Fuel Gas Code ANSIZ223.1/NFPA-54 -latest edition. • The installer must leave these instructions with the consumer who should retain for local inspector's use and for future reference. In Canada: Installation must be in accordance with the current CAN/CGA B149.1 & 2 Gas Installation codes and/or local codes. Electrical installation must be in accordance with the current CSA C22.1 Canadian Electrical Codes Part 1 and/or local codes. Commonwealth of Massachusetts: • Installations and repairs must be performed by a qualified or licensed contractor, plumber or gas fitter, qualified or licensed by the state, province or region where this appliance is being installed. • Use only gas shut-off valves approved for use within the state, province or region where this appliance is being installed. • A flexible gas connector, when used, must not exceed 3' (.9 m). California Proposition 65 Burning gas cooking fuel generates some byproducts that are on the list of substances known to cause cancer or reproductive harm. To minimize exposure to these substances, always operate this unit according to the instructions contained in this book and provide good ventilation. Your safety and the safety of others is very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to hazards that can kill or hurt you and others. All safety messages will be preceded by the safety alert symbol and the word "DANGER," "WARNING" or "CAUTION." These words mean: DANGER Hazards or unsafe practices which WILL result in severe personal injury or death. WARNING Hazards or unsafe practices which COULD result in severe personal injury or death. CAUTION Hazards or unsafe practices which COULD result in minor personal injury or property damage. All safety messages will identify the hazard, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed. 3