Viking VDSC536T Countertop Rear Trim - Installation Instructions - Page 4

Curb Bases CUSTOM CURB BASE FRONT 1. Remove the standard curb base front assembly from the carton. 2. Remove the front (A) from the mounting assembly (B). 3. Attach locally supplied front (C) to the mounting assembly (B) and simply clip onto the front range legs. Important Note: The locally supplied front must not be any taller than 3-1/8" (7.9 cm) tall. Fronts taller than 3-1/8" (7.9 cm) could obstruct the airflow. 4. The assembly is adjustable about 2" (5.1 cm) front to back so that alignment with the cabinet toe front is possible. Loosen brackets on each side, but allow snug fit. Clip assembly onto range legs; determine front to back setting; remove, tighten bolts, and reattach. B C Important Note: The range must be installed as specified in the range installation guide for proper airflow when using the custom curb base. Curb Bases COUNTERTOP REAR TRIM 1. Locate screw hole openings (A) on back of island trim near the top. 2. Align screw hole openings on countertop rear trim with the ones on the back of the island trim. 3. Attach rear trim to island trim with enclosed screws. A 6 7