Viking VESO5302SS Use and Care Manual - Page 10
Digital Display, Analog Clock
View all Viking VESO5302SS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Product Controls Product Controls Clocks and Timers (Digital Display) 3. Set the Oven Function selector to the desired function - BAKE, CONVECTION BAKE, OR TRUCONVEC™, etc. 4. Set the temperature control knob to the desired baking temperature. 5. The automatic time bake program is now set! NOTE: The display will continue to show the amount of bake time that was programmed (this will remain until the programmed start time is reached). You can return the display to clock mode by pressing the "CLOCK" button - Notice that a small clock will be displayed in the upper right corner to indicate that a program is in progress. Switch back to the timer mode by pressing the "BAKE HOURS" button. 6. When the specified time is reached, the oven will automatically turn on. It will bake for the programmed amount of time at the selected temperature. NOTE: At one minute from the end of the specified bake program, the oven timer will beep once. At the end of the specified bake program, the oven will automatically turn off and the timer will sound a series of three beeps. This will continue until the "START TIME" button is pressed. The display will then return to displaying the time. NOTE: Setting the remaining duration time to :00 will cancel the Automatic Bake program. Clocks and Timers (Analog Clock) Setting the Min/Sec Timer The Min/Sec Timer is designed for accurate timing and is ideal for baking delicate items such as biscuits, cookies, and popovers, and for precise broiling. The Min/Sec timer can be used at the same time the Bake Hours or Start Time functions are in use. It can be used for timing up to 24 hours. To program the Min/SecTimer 1. Push and release the "min/sec timer" button. 2. Rotate "Set" knob until desired duration of time is displayed. Timer starts seconds after "Set" knob stops rotating. A tone indicates the timer has started. When the timer has one minute remaining, the timer will sound twice and begin to countdown by seconds. A tone will sound three times indicating the time is complete and twice every ten seconds after completion until timer function is cleared. NOTE: Press any function button to clear a completed cycle or function. 18 19