Viking VGBQ5304RE2NSS Specs - Page 5

OUTDOOR-COOKING, Installation Requirements

Page 5 highlights

OUTDOOR-COOKING 53"W. Ultra-Premium T-Series/E-Series Gas Grill Installation Requirements ACCESS REQUIREMENTS VGBQ530-4RE2 E-Series Four-Burner All-Grill VGBQ532-3RE2 E-Series Three-Burner Grill w/Side Burners Gas inlet and power cord location area VGIQ530-4RT/E2 T-Series/E-Series Four-Burner All-Grill (inc. TruSear™ Burner) VGIQ532-3R/E2 E-Series Three-Burner Grill w/Side Burners (inc. TruSear™ Burner) (12.7 5" cm) (152".7 cm) (712.18"cm) (15322-.17/c4m") (913.46"cm) *Solid bottom support Electrical connection for rotisserie motor (position unit so that the plug is always accessible) (7.6 3" cm) min. Electrical connection for power supply cord on E-Series to be located on rear wall with a maximum distance of 2' (61.0 cm) beneath solid bottom support. **Access door opening (1206-.01/c4m") (1.21c/m2)" 1(1/2.2" cm) Countertop typically requires 1/2" wide by 1/2" deep notch cutout on each side of grill. This allows grill CP to sit back properly in the cutout. *Cabinet Cutout must have a solid bottom to support the full weight of the unit. **Access Doors sold seperately Cutout width Cutout height Cutout depth All models 52-1/4" (132.7 cm) 10-1/4" (26.0 cm) 28" (71.1 cm) PLANNING AND DESIGN GUIDE VIKINGRANGE.COM • 1-888-VIKING1 REVISED 5/16/11 © 2 0 1 1 V R C - INFORMATION SUBJECT TO CHANGE

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8

OUTDOOR—COOKING
53”W. Ultra-Premium T-Series/E-Series Gas Grill
PLANNING AND DESIGN GUIDE
VIKINGRANGE.COM
1-888-VIKING1
VGBQ530-4RE2
E-Series
Four-Burner All-Grill
VGBQ532-3RE2
E-Series
Three-Burner Grill
w/Side Burners
VGIQ530-4RT
/E2
T-Series/E-Series
Four-Burner All-Grill
(inc. TruSear™ Burner)
Installation Requirements
ACCESS REQUIREMENTS
All models
Cutout width
52-1/4” (132.7 cm)
Cutout height
10-1/4” (26.0 cm)
Cutout depth
28” (71.1 cm)
*Cabinet Cutout must have a solid bottom to support the full weight of the unit.
**Access Doors sold seperately
REVISED 5/16/11
© 2 0 1 1 V R C — INFORMATION SUBJECT TO CHANGE
10-1/4”
(26.0 cm)
36”
(91.4 cm)
**Access door opening
28”
(71.1 cm)
52-1/4”
(132.7 cm)
3”
(7.6 cm) min.
Electrical connection
for rotisserie motor
(position unit so that
the plug is always
accessible)
Electrical connection
for power supply cord on
E-Series to be located on
rear wall with a maximum
distance of 2’ (61.0 cm)
beneath solid bottom
support.
*Solid bottom support
Gas inlet and power cord
location area
5”
(12.7 cm)
5”
(12.7 cm)
Countertop typically requires
1/2” wide by 1/2” deep notch
cutout on each side of grill.
This allows grill CP to sit back
properly in the cutout.
1/2”
(1.2 cm)
1/2”
(1.2 cm)
VGIQ532-3R
/E2
E-Series
Three-Burner Grill
w/Side Burners
(inc. TruSear™ Burner)