Viking VGSC548 Use and Care Manual - Page 24
Oven Racks, Control Knobs, Stainless Steel Parts, Glass Surfaces, Brass Parts, Broiler Pan and Grid
View all Viking VGSC548 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Product Care Cleaning and Maintenance Control Knobs MAKE SURE ALL THE CONTROL KNOBS POINT TO THE OFF POSITION BEFORE REMOVING. Pull the knobs straight off. Wash in WARNING detergent and warm water. Dry completely and replace by pushing firmly onto stem. DO NOT use any cleaners containing ammonia or abrasives. They could remove the graphics from the knob. Stainless Steel Parts All stainless steel body parts should be wiped regularly with hot soapy water at the end of each cooling period and with a liquid cleaner designed for that material when soapy water will not do the job. DO NOT use steel wool, abrasive cloths, cleansers, or powders. If necessary, scrape stainless steel to remove encrusted materials, soak the area with hot towels to loosen the material, then use a wooden or nylon spatula or scraper. DO NOT use a metal knife, spatula, or any other metal tool to DANGER scrape stainless steel. DO NOT permit citrus or tomato juice to remain on stainless steel surface, as citric acid will permanently discolor stainless steel. Wipe up any spills immediately. Glass Surfaces Clean with detergent and warm water. Glass cleaner can be used to remove fingerprints. If using glass cleaner ammonia, make sure that it does not run down on exterior door surface. Brass Parts CAUTION All special ordered brass parts are coated with an epoxy coating. DO NOT USE BRASS CLEANERS OR ABRASIVE CLEANERS ON ANY BRASS PARTS. All brass body parts should be wiped regularly with hot soapy water. When hot soapy water will not do the job, use every day household cleaners that are not abrasive. Broiler Pan and Grid Clean with detergent and hot water. For stubborn spots, use a soapfilled steel wool pad. FOR YOUR SAFETY 46 Cleaning and Maintenance Oven Racks Clean with detergent and hot water. Stubborn spots can be scoured with a soap-filled steel wool pad. WARNING BURN OR ELECTRICAL SHOCK HAZARD Make sure all controls are OFF and oven is COOL before cleaning. Failure to do so can result in burns or electrical shock. DANGER CAUTION FOR YOUR SAFETY 47 Product Care