Viper 310V Owner Manual - Page 12

Disarming Press to disarm the security system when it is already armed. If the power locks are controlled by the system, the doors will also unlock. Disarming is confirmed when the parking lights flash twice and the siren emits two chirps. The LED system status indicator will also stop flashing. The siren chirping either four or five times when disarming indicates Tamper Alert, which is described in the Diagnostics section of this guide. Disarming Without a Remote If your remote is lost or damaged, you can manually disarm your vehicle security system. To disarm the system without a remote, you must have the vehicle's ignition key and know where the Valet® switch is located. Be sure to check with your installer at the time of installation for the location of the Valet® switch. To disarm the security system, turn the ignition key on and press the Valet® switch within 15 seconds. The system should DRW-35 now disarm. If the system does not disarm, you may have waited too long to press the Valet® switch; turn the ignition off and repeat the process. Location of Valet® Switch 8 © 2005 Directed Electronics, Inc. (Canada)