Viper 320HV Owner Manual - Page 12
Disarming, Disarming without a transmitter - installation manual
View all Viper 320HV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
➜ Disarming Press to disarm the security system. If the power locks are controlled by the system, the doors will also unlock. Disarming is confirmed when the parking lights flash twice and the siren chirps twice. If the siren chirps more than two times and the LED continues to flash after pressing the button, the system was triggered in your absence. Refer to the disarming diagnostics section to determine the cause. ➜ Disarming without a transmitter If your remote transmitter is lost or damaged, you can manually disarm the security system. To disarm the system without a transmitter, you must have the vehicle's ignition key and know where the Valet switch is located. Be sure to check with your installer at the time of installation for the location of the Valet switch. To disarm the security system, turn the ignition key on. Press the Valet switch within 15 seconds. The system should now disarm. If the system does not disarm, you may have waited too long to DRW-35 press the Valet switch; turn the ignition off and repeat the process. Location of Valet Switch © 2004 Directed Electronics, Inc. 9