Viper 330V Owner Manual - Page 9

To enter or exit Valet® Mode with the Valet® switch: Turn ignition to "on" position, then turn to "off" position. Press and release the Valet® switch within 10 seconds. The status DRW-35 LED will light steady if you have entered Valet® Mode. To exit Valet® Mode, repeat the steps above. The LED will turn off when exiting Valet® Mode. remote valet® Remote Valet® is a convenient feature that makes bypassing the security system easier. This feature makes it possible to exit or enter Valet® Mode using your factory keyless transmitter. 1. Open any door. 2. Press LOCK on the transmitter. 3. Press UNLOCK on the transmitter. 4. Press LOCK on the transmitter. The status LED will stay on if you have entered Valet® Mode, and it will go out if you exited Valet® Mode. note: The remote Valet® feature will not work with all factory keyless entry systems. Some keyless entry systems do not work with a door open. panic mode If you are threatened in or near your vehicle, you can attract attention by triggering the system with your transmitter! If your factory keyless 6 © 2005 directed electronics, inc.