Viper 4708V Owner Manual - Page 16
Using the 1-Way Companion Remote, Accessing Commands, Button Auto Lock, Programming
View all Viper 4708V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Using the 1-Way Companion Remote The companion 1 way remote commands the system features as shown in the previous table, but without the message display of the Responder LC3 remote. Parking light flashes is used to indicate that a command has been received and activated as described in the Basic and Advanced command sections. Accessing Commands Similar to the Responder LC3 remote, Basic commands are performed when a command button is pressed directly. To perform Advanced Commands press the button 1 to 4 times to access function levels, x4 in the table for example implies pressing 4 times. The LED flashes in groups for a few seconds to indicate the level. Press the desired command button while the LED is flashing to perform the command. Button Auto Lock When On, the remote control buttons lock if more than 20 seconds lapses between button presses. If a button is pressed when locked, a fault tone is emitted. To unlock the buttons; press the button followed by the button, the buttons unlock and tones play to confirm. Programming To enter; hold the button for 8 seconds, the remote emits one long beep and turns the LED on, the programming main menu has been accessed. © 2012 Directed. All rights reserved. 15