Viper VSS3000 Owner Manual - Page 8

Disabling the Remote Start system This feature allows your system's remote start unit to be temporarily disabled to prevent the vehicle from being remote started accidentally. This feature is useful if the vehicle is being serviced or stored in an enclosed area. To disable the remote start, move the shutdown toggle switch to the OFF position. The switch can be installed in a location of your choice. Check with your installer for recommended locations. Location Of Shutdown Switch Programming options Programming options control your system's normal, operational set-up. Most options do not require additional parts, but some may require installation labor. See your authorized Directed dealer for more details. The following is a list of the programmable options, with the factory settings in bold. • 12, 24, or 60 minute run time. Your system can be programmed to allow the vehicle to run for 12, 24, or 60 minutes when remote started. Can be set up to minute increments by your installer. • Parking lights flashing or constant. Your system can be programmed to flash or turn on the parking lights constantly during the entire remote start operation. 4 © 2010 Directed Electronics. All rights reserved.