Vizio E320VL E320VL User Manual - Page 15

VIZIO E320VL and E370VL User Manual Chapter 3 VIZIO Remote Control Installing the Batteries 1. Remove the battery cover. 2. Insert two AA batteries into the remote control. Make sure that you match the (+) and (-) symbols on the batteries with the (+) and (-) symbols inside the battery compartment. 3. Replace the battery cover. Precautionary Tips for Inserting the Batteries: • Only use Alkaline AA batteries. • Do not mix new and old batteries. This may result in cracking or leakage that may cause a fire or lead to personal injury. • Inserting the batteries incorrectly may also result in cracking or leakage that may cause a fire or lead to personal injury. • Dispose of batteries according to local hazardous waste regulations. • Keep the batteries away from children and pets. Remote Control Range • Point the remote control directly at this sensor for the best response to the remote signal. • Do not place any obstacles between the remote control and the remote control sensor. • The effective range of the remote control is approximately 22 feet (7 meters) from the front of the remote control sensor, 30° to the left and right, 20° up and down. VIZIO Remote Control Precautions • The remote control should be kept dry and away from heat sources. Avoid humidity. • If the TV responds erratically to the remote control or does not respond at all, check the batteries. If the batteries are low or exhausted, replace them with fresh batteries. • When not using the remote control for a long period of time, remove the batteries. • Do not take the batteries apart, heat them, or throw them into a fire. • Do not subject the remote control to undue physical stress, such as striking or dropping it. • Do not attempt to clean the remote control with a volatile solvent. Wipe it with a clean, damp cloth. Version 2/10/2010 15 www.VIZIO.com