Home » Vizio Manuals » Flat Panel Televisions » Vizio GV46L » Manual Viewer

Vizio GV46L User Manual - Page 22

Using S-Video AV

Add to My Manuals
Save this manual to your list of manuals

Page 22 highlights

2.2.3 Using S-Video (AV) Connecting your DVD Player (Good): VIZIO GV46L HDTV User Manual 1. Turn off the power to the LCD HDTV and DVD player. 2. Connect the S-Video jack on the rear of your DVD player to the S-Video jack associated (red area) with the AV1 group (yellow area) at the rear of the LCD HDTV. 3. Using an audio cable (white and red connectors), connect the cable to the audio output connectors associated with the S-Video output on your DVD player and connect the other end to the audio connectors associated with the AV1 input (yellow area) at the rear of the LCD HDTV. 4. Turn on the power to the LCD HDTV and DVD player. 5. Select AV1 using the INPUT button on the remote or side of the LCD HDTV, or directly by pressing the AV button on the Remote Control. Note: a) b) If you are already using the AV1 input for another component, or you do not want to use the AV1 input for the DVD player, you can connect the DVD player to the AV2 connections coded by the red area and orange areas. Refer to your DVD player user manual for more information about the video output requirements of the product. Version 5/18/2007 22 www.VIZIOCE.com

Section	Page
Chapter 1 Basic Controls and Connections	11
Front Panel	11
1.2 Side Panel Controls	11
1.3 Rear Panel Connections	12
1.4 VIZIO Universal Remote Control	14
1.4.1 Insertion of Batteries in the Remote Control	17
1.4.2 Remote Control Range	17
1.4.3 VIZIO Universal Remote Control Precautions	17
Chapter 2 Connecting Equipment	18
2.1 Which Video Connection Should I Use?	18
2.2 Connecting Your DVD Player	19
2.2.1 Using HDMI	19
2.2.2 Using Component Video	21
2.2.3 Using S-Video (AV)	22
2.2.4 Using Composite (AV) Video	23
2.3 Connecting Your HDTV Set-Top Box	24
2.3.1 Using HDMI	24
2.3.2 Using Component Video	26
2.4 Connecting Your VCR or Video Camera	27
2.5 Connecting Coaxial (RF)	28
2.5.1 Using Your Antenna or Digital Cable for DTV	28
2.5.2 Using Your Antenna or Cable for TV	29
2.5.3 Using the Antenna or Cable through your VCR	29
2.6 Connecting an external Receiver/Amp	30
2.7 Connecting a PC Computer	31
Chapter 3 Setting Up to Watch Television	32
3.1 Basic LCD HDTV Start Up	32
3.2 Using TV with an Antenna or Cable	32
3.2.1 First Time TV Use	32
3.2.2 Setting TV Channels	33
3.2.3 Adding or Deleting (Skipping) TV Channels	34
3.3 Using DTV with an Antenna or Cable	34
3.3.1 First Time DTV Use	34
3.3.2 Setting DTV Channels Automatically	35
3.3.3 Setting DTV Channels Manually	38
3.3.4 Adding or Deleting (Skipping) DTV Channels	39
3.3.5 Digital Audio Out	40
3.3.6 Closed Caption for DTV	40
3.3.7 Parental Controls for DTV	42
3.4 Watching a TV Program	44
3.5 Adjusting Basic LCD HDTV Settings	44
3.6 DTV Channel Information	45
3.7 Program Information	46
Chapter 4 Adjustment of the HDTV	47
4.1 Using the On Screen Display (OSD)	47
4.2 Image Settings for TV and Video Inputs	48
4.2.1 Picture Mode	48
4.2.2 Brightness	48
4.2.3 Contrast	48
4.2.4 Saturation	49
4.2.5 Hue	49
4.2.6 Sharpness	49
4.2.7 Custom Color	49
4.3 Image Settings for PC	50
4.3.1 Brightness	50
4.3.2 Contrast	50
4.4 Advanced Image Settings for TV and Video	51
4.4.1 Noise Reduction	51
4.4.2 Fleshtone	51
Dynamic Contrast	51
Backlight	51
4.5 Advanced Image Settings for PC	52
Auto Adjustment	52
4.5.2 Image Position	52
Phase	52
Clocks / Line	52
Color Temp	52
4.5.6 Backlight	53
Display Settings	53
Aspect Ratio	53
4.6.2 PIP (Picture-In-Picture)	53
4.7 Audio Settings	54
Bass	54
4.7.2 Treble	54
4.7.3 Balance	54
4.7.4 SRS TS XT	54
4.7.5 Auto Volume	54
4.7.6 Speakers	54
4.7.7 Audio Out	54
4.8 Parental Controls	55
Settings	55
Change Password	55
4.8.3 Clear All	55
4.8.4 TV Rating	55
4.8.5 Movie Rating	56
4.8.6 Block Unrated	56
4.8.7 Setting a Password	57
4.8.8 Resetting the Password	57
4.9 Setup for Video and PC	58
4.9.1 Language	58
4.9.2 Factory Reset	58
4.9.3 Image Cleaner	58
4.9.4 Firmware Version	58
4.9.5 Closed Caption	58
4.9.6 Closed Caption on Mute	58
4.10 Understanding Viewing Features	59
4.10.1 Viewing Modes	59
4.10.2 PIP / POP Mode	60
4.10.3 Adjusting Basic PIP/POP Settings	60
4.11 Setting the Sleep Timer	61
Chapter 5 Programming the VIZIO Universal Remote Control	62
5.1.1 Programming for VCR	62
5.1.2 Programming for Cable Set-Top Box	62
5.1.3 Programming for DVD Player	63
5.1.4 Searching for Component Codes	63
5.2 Using a Cable or Satellite Remote	63
Chapter 6 Maintenance and Troubleshooting	64
6.1 Maintenance	64
6.2 Troubleshooting Guide	64
6.3 Telephone & Technical Support	66
6.4 Compliance	67
6.5 FCC Class B Radio Interference Statement	67
Chapter 7 Miscellaneous Information	68
7.1 Specifications	68
7.2 Glossary – Standard Definitions	69
7.3 Index	70
7.4 Limited Product Warranty	72
7.4.1 VIZIO Extended Service Warranty	72

Match case Limit results 1 per page

VIZIO GV46L HDTV User Manual

Version 5/18/2007

www.VIZIOCE.com

2.2.3

Using S-Video (AV)

Connecting your DVD Player (Good):

Turn off the power to the LCD HDTV and DVD player.

Connect the S-Video jack on the rear of your DVD player to the S-Video jack associated (red

area) with the AV1 group (yellow area) at the rear of the LCD HDTV.

Using an audio cable (white and red connectors), connect the cable to the audio output

connectors associated with the S-Video output on your DVD player and connect the other

end to the audio connectors associated with the AV1 input (yellow area) at the rear of the

LCD HDTV.

Turn on the power to the LCD HDTV and DVD player.

Select AV1 using the INPUT button on the remote or side of the LCD HDTV, or directly by

pressing the AV button on the Remote Control.

Note:

If you are already using the AV1 input for another component, or you do not want to use the

AV1 input for the DVD player, you can connect the DVD player to the AV2 connections

coded by the red area and orange areas.

Refer to your DVD player user manual for more information about the video output

requirements of the product.