Vizio M370NV M370NV User Manual - Page 35

VIZIO M320NV or M370NV User Manual Equalizer Settings To select the options in the Equalizer sub-menu, press OK. A new menu will be displayed showing the volumes of different frequencies. Starting from lowest to the highest, they are 120Hz, 500Hz, 1.5kHz, 5kHz and 10kHz. 1. Press & or " to select the frequency to be adjusted. 2. Use $ or % to adjust the selected frequency to your preference. Values above 0 will boost the frequency and values below 0 will attenuate the frequency. Note: The Equalizer adjustment will only be available when SRS TSHD is set to Off. Reset Audio Mode Return all Audio settings to factory default. A screen will come up to confirm your selection or to cancel it. Press & or " to make the selection, and then press OK to accept it. Note: Only settings under the Audio menu will be reset. Settings Menu Tuner Note: The tuner option can only be selected when your HDTV is in TV input mode. Tuner Mode Select Cable or Antenna depending upon which you have attached to the DTV / TV Input. Auto Channel Search Automatically search for TV channels that are available in your area. Be sure to first select the correct tuner mode above. The TV will search for analog and digital channels. When the search is done, press OK to begin watching your programs. Partial Channel Search If you believe channels are missed from the auto search, you can do a partial channel search to look for channel in a certain channel range again. Select to scan for Analog, Digital, or both Analog/Digital channels, then press the ! button to highlight the "From" and "To" selection. Press the " button to select the range of channel numbers you want to start searching in. Press OK to start channel search. Version 8/4/2010 35 www.VIZIO.com