Vizio SB3621n-G8 User Manual - Page 17

LED INDICATORS The LED Indicators will behave differently with each button on the remote control. LED Indicators are located here. Function Input Analog Audio In - AUX (1) Coaxial In - Digital (2) Digital Optical Audio In Optical (3) Bluetooth USB In - USB (5) LED Behavior Description Press the INPUT button on the remote to cycle through the available inputs: •Analog Audio In - AUX Stereo RCA (1) •Coaxial In - Digital (2) •Digital Optical Audio In - Optical (3) •Bluetooth •USB In - USB (4) Press and hold the INPUT button on the remote control for 3 seconds to enable the auto input detect function. Bluetooth Pairing (When searching for device) Flash from the bottom to the top and back continuously. Press and hold the button on the remote. The sound bar will be discoverable for 15 minutes. You can now search for the sound bar (VIZIO SB3621n) using your Bluetooth Device. The sound bar will power down if no device is found. Note: Set your Bluetooth device into pairing mode prior to the Sound Bar. DTS TruVolume On/Off TruVolume On TruVolume Off Press the TVOL button to enable/disable TruVolume. When enabled (On), TruVolume provides a consistent and comfortable volume level for a more enjoyable listening experience. Virtual:X On/ Off Virtual:X On Virtual:X Off Press the VRT:X button to enable/disable Virtual:X. When enabled (On), all inputs will produce a virtual sound technology that simulates the effect of having overhead sound. When disabled (Off), all sources will playback in stereo. English - 17