Vizio SB362An-F6 Quick Start Guide - Page 13

LED INDICATORS The LED Indicators will behave differently with each button on the remote control. Function Input LED Behavior Analog Audio In - AUX Digital Optical Audio In Optical Bluetooth USB Bluetooth Pairing (When searching for device) Flash from the bottom to the top and back continuously. DTS TruVolume On/Off TruVolume On TruVolume Off LED Indicators are located here. Description Press the Input button on the remote to cycle through the available inputs: •Analog Audio In - AUX Stereo 3.5mm •Digital Optical Audio In - Optical •Bluetooth •USB In - USB Press and hold the INPUT button on the remote control for 3 seconds to enable the auto input detect function. Press and hold the button on the remote. The Sound Bar will be discoverable for 15 minutes. You can now search for the Sound Bar (VIZIO SB362An) using your Bluetooth Device. The sound bar will power down if no device is found. Note: Set your Bluetooth device into pairing mode prior to the Sound Bar. Press the TVOL button to enable/disable TruVolume. When enabled (On), TruVolume provides a consistent and comfortable volume level for a more enjoyable listening experience English - 13