Vizio SB36312-G6 User Manual - Page 21

Function AV Delay AV Delay TV Remote VZtv Rmt On Program Remote Prg Remote Eco Power On/Off Eco Pwr Power LED Pwr LED Speaker Test Spkr Test LED Behavior LED at the bottom indicates no delay TV Remote On TV Remote Off −− Eco Power On Eco Power Off Power LED On Power LED Off - Description Press the Next/Previous button to increase/decrease the amount of audio delay. The LED indicators will move to the top with increasing audio delay levels. Press the Next/Previous button to enable/disable VIZIO TV Remotes. When enabled (On), you can use a VIZIO TV remote control to turn on the sound bar (using the TV Volume Up button) and control volume. Press the Next/Previous and Play buttons to toggle and select and program your TV remote to control the Volume Down, Volume Up, and Mute functions on your sound bar. See the Programming the Sound Bar section for more information. Press the Next/Previous button to enable/disable Eco Power Mode. When enabled (On), the sound bar will go into standby after a period of inactivity. The sound bar will automatically turn off when no audio signal is detected. Off disables this feature. Note: If you would like to cast content without the need to manually turn on the sound bar, set this function to OFF. Press the Next/Previous and Play buttons to enable/disable the Power LED. Press the Play/Pause button to activate the speaker test function. A voice will begin calling out each speaker beginning with left front. (Left Front, Center, Right Front, Left Front Height, Right Front Height, and subwoofer-white noise) If any of these are missing, check the connection and run the speaker test function again. English - 21