Vizio VHT510 VHT510 Quick Start Guide - Page 4

3 Connect Equipment (CONTINUED) Connecting an iPod Dock (not included) LR 1. Turn off power to the Soundbar and the MP3 Player. 2. Connect one end of the audio cable to the analog audio output on the MP3 player docking unit. 3. Connect the other end of the audio cable (white and red connectors) to the IN jacks on the Soundbar. NOTES: • Most MP3 players commonly use a 1/8" Stereo Mini-Jack. In this case, use a 1/8" stereo mini-jack-to- RCA (AV) cable (sold separately). • Refer to your MP3 Player user manual for more information about the audio output settings and connections of the product. 4. Turn on the power to the Soundbar and MP3 Player. 5. Select the associated input by pressing INPUT on the top of the Soundbar or pressing IN on the remote control. CAUTION: Do not connect the MP3 Player headphone output directly to the Soundbar. This can result in damage to the devices. 4 Connect Power - Soundbar 1. Connect one end of the AC adapter into the 24V DC jack on the back of the Soundbar. 2. Plug the other end into a wall outlet. 4 5 Connect Power - Subwoofer 1. Connect one end of the AC adapter into the 100-240V AC jack on the back of the Subwoofer 2. Plug the other end into a wall outlet. 3. Turn the Power Switch to ON. 6 Connecting rear speakers to the subwoofer 1. Choose a location for your satellite speakers. 2. Connect the cable from the left satellite speaker to the left connector on the back of the subwoofer. 3. Connect the cable from the right satellite speaker to the right connector on the back of the subwoofer. NOTES: For best results, place the satellite speakers behind the primary listening position. If it is desired to put all the speakers in the front of the room, the front facing mode should be selected on the soundbar. Any length speaker wires can be used. Refer to the User Manual to add longer speaker wire. Cable Cable Left satellite speaker Subwoofer Right satellite speaker 5