Home » Vizio Manuals » Flat Panel Televisions » Vizio VW26LHDTV20F » Manual Viewer

Vizio VW26LHDTV20F VW26L User Manual - Page 17

For HDTV Set-Top Boxes with DVI

Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

For HDTV Set-Top Boxes with DVI: VIZIO VW26L HDTV10F User Manual 1. Turn off the power to the HDTV and HDTV Set-Top Box. 2. Using a HDMI-DVI cable, connect the DVI end to your HDTV Set-Top Box and the HDMI end to the HDMI2 Input (white color area) at the rear of the HDTV. 3. Using an audio cable (white and red connectors), connect the cable to the audio output connectors associated with the DVI output on your HDTV Set-Top Box and connect the other end to the audio connectors associated with the HDMI 2 input (white area) at the rear of the HDTV. 4. Turn on the power to the HDTV and HDTV Set-Top Box. 5. Select HDMI 2 using the INPUT button on the remote or side of the HDTV, or directly by pressing the HDMI button on the Remote Control. Note: The HDMI Input is for HD Video and will only support 640x480, 800x600, 1024x768 and 1366x768 at 60Hz from a PC. Use the RGB PC input for a greater selection of PC formats. Note: a) b) The HDMI input on the HDTV supports High-bandwidth Digital Content Protection (HDCP). HDCP encrypts the transmission between the video source and the digital display for added security and protection. Refer to your HDTV Set-Top Box user manual for more information about the video output requirements of the product or consult your cable or satellite operator. Version 9/20/2007 17 www.VIZIO.com

Section	Page
Chapter 1 Basic Controls and Connections	8
Front Panel	8
Right Side Panel Controls	8
Left Side Connections	8
1.4 Rear Panel Connections	9
1.5 VIZIO Remote Control	10
1.5.1 Insertion of Batteries in the Remote Control	12
1.5.2 Remote Control Range	12
1.5.3 VIZIO Remote Control Precautions	12
Chapter 2 Connecting Equipment	13
2.1 Which Video Connection Should I Use?	13
2.2 Coaxial (RF)	14
2.2.1 Using Your Antenna or Digital Cable for DTV	14
2.2.2 Using Your Antenna or Cable for TV	15
2.2.3 Using the Antenna or Cable through your VCR	15
2.3 Connecting Your HDTV Set-Top Box	16
2.3.1 Using HDMI	16
2.3.2 Using Component Video	18
2.4 Connecting Your Basic Set-Top Box	19
2.4.1 Using Composite Video	19
2.4.2 Using Coax (RF)	19
2.5 Connecting Your DVD Player	20
2.5.1 Using HDMI	20
2.5.2 Using Component Video	21
2.5.3 Using S-Video (AV2)	22
2.5.4 Using Composite (AV) Video	22
2.6 Connecting Your VCR or Video Camera	23
2.7 Connecting Connecting a PC Computer	23
2.7.1 Preset PC Resolutions	24
2.7.2 Using a PC	24
Chapter 3 Setting Up to Watch Television	25
3.1 Basic LCD HDTV Start Up	25
3.2 Watching a TV Program	27
3.3 Adjusting Basic HDTV Settings	27
3.4 Program Information	28
3.5 Information on HDTV Status	28
Chapter 4 Advanced Adjustment of HDTV	29
4.1 Using the On Screen Display (OSD)	29
4.2 DTV / TV Input Picture Adjustment	30
Picture Mode	30
4.2.2 Backlight	30
4.2.3 Contrast	31
4.2.4 Brightness	31
4.2.5 Sharpness	31
4.2.6 Color	31
4.2.7 Tint	32
4.2.8 Color Temperature	32
4.2.9 Advanced Setting	33
DNR	33
Black Level Extender	33
Peak White Limiter	33
CTI	33
Color Enhancement	33
Dynamic Contrast	33
Dynamic Backlight	33
4.3 DTV / TV Input Audio Adjustment	34
Volume	34
4.3.2 Treble	34
4.3.3 Bass	34
4.3.4 Balance	35
4.3.5 Surround	35
4.4 TV Setup	35
TV Input	35
4.4.2 Auto Search	35
4.4.3 Skip Channel	36
4.4.4 Time Zone	36
4.4.5 Daylight Saving	36
4.5 DTV / TV Input Parental Control	36
4.5.1 Channel Block	36
4.5.2 TV Rating	38
4.5.3 Movie Rating	38
4.5.4 Blocked Unrated Programming	39
4.5.5 Change the Password	39
4.6 Input Setup	40
4.6.1 Language	40
4.6.2 Sleep Timer	40
4.6.3 Wide Format	40
SD Programming	40
HD Programming	40
RGB (PC)	40
4.6.4 Analog Closed Caption	41
4.6.5 Digital Closed Caption	41
4.6.6 Digital Closed Caption Style	41
4.6.7 Reset All Settings	41
4.7 HDMI Input Picture Adjustment	42
4.8 HDMI Input Audio Adjustment	42
4.9 HDMI Input Setup	42
4.10 Video Input Picture Adjustment	43
4.11 Video Input Audio Adjustment	43
4.12 Video Input Setup	43
4.13 Video Input Parental Control	44
4.14 PC Input Picture Adjustment	44
4.14.1 Auto Adjust	44
4.14.2 Backlight	44
4.14.3 Contrast	44
4.14.4 Brightness	45
4.14.5 Color Temperature	45
4.14.6 H-SIZE	46
4.14.7 H. Position	46
4.14.8 V. Position	46
4.14.9 Fine Tune	46
4.15 PC Input Audio Adjustment	46
4.16 PC Input Setup	46
4.17 Understanding Viewing Modes	47
4.17.1 Setting the Sleep Timer	48
4.18 Using a Cable or Satellite Remote	48
Chapter 5 Maintenance and Troubleshooting	48
5.1 Maintenance	48
5.2 Troubleshooting Guide	49
5.3 Telephone & Technical Support	50
5.4 Compliance	51
5.5 FCC Class B Radio Interference Statement	51
Chapter 6 Miscellaneous Information	52
6.1 Specifications	52
6.2 Glossary – Standard Definitions	53

Match case Limit results 1 per page

VIZIO VW26L HDTV10F User Manual

For HDTV Set-Top Boxes with DVI:

Turn off the power to the HDTV and HDTV Set-Top Box.

Using a HDMI-DVI cable, connect the DVI end to your HDTV Set-Top Box and the HDMI end

to the HDMI2 Input (white color area) at the rear of the HDTV.

Using an audio cable (white and red connectors), connect the cable to the audio output

connectors associated with the DVI output on your HDTV Set-Top Box and connect the other

end to the audio connectors associated with the HDMI 2 input (white area) at the rear of the

HDTV.

Turn on the power to the HDTV and HDTV Set-Top Box.

Select HDMI 2 using the INPUT button on the remote or side of the HDTV, or directly by

pressing the HDMI button on the Remote Control.

Note

The HDMI Input is for HD Video and will only support 640x480, 800x600, 1024x768 and 1366x768

at 60Hz from a PC.

Use the RGB PC input for a greater selection of PC formats.

Note:

The HDMI input on the HDTV supports High-bandwidth Digital Content Protection

(HDCP).

HDCP encrypts the transmission between the video source and the

digital display for added security and protection.

Refer to your HDTV Set-Top Box user manual for more information about the

video output requirements of the product or consult your cable or satellite operator.

Version 9/20/2007