Vtech 2656 User Manual - Page 12
Enter Base ID Code
UPC - 735078004758
View all Vtech 2656 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Getting Started Registration of Additional Handsets Enter Base ID Code 1. After charging the Handset, if the screen displays SEARCHING FOR BASE, press NEW. You will see ENTER BASE ID. If the screen already says ENTER BASE ID, go to step 2. 2. Enter the 15 digit Base Unit ID code, located on the underside of the Base Unit. 3. Press OK. The Handset will display: PLEASE WAIT!! Then put the Handset onto the cradle. 4. Wait approximately 15 seconds. The Handset will display: FOUND BASE If the Handset displays: BASE BUSY TRY LATER, this indicates that the system is in use. Wait until the Base Unit is in the idle (on hook) mode, and repeat steps 2 to 4. NOTE: Occasionally, it may take longer than 15 seconds for the Handset to confirm registration to the Base Unit. This is normal. Congratulations! You can now enjoy the benefits of your multi-Handset system. 12 91-005358-050-000 v2656.pmd 12 8/5/2004, 4:51 PM