Vtech 40-2420 User Guide - Page 6
Registration, Enter Base ID Code, PLEASE WAIT - handset
UPC - 735078000347
View all Vtech 40-2420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Getting Started Enter Base ID Code 1. After charging the Handset, remove it from its Charge Cradle, the screen will display: 2. Press NEW, then enter the 15 digit Base Unit ID code, located on the underside of the Base Unit. 3. Press OK. The Handset will display: PLEASE WAIT!! 4. Wait approximately 15 seconds. The Handset will display: FOUND BASE If the Handset displays: BASE BUSY TRY LATER, this indicates that the system is in use. Wait until the Base Unit is in the idle (on hook) mode, and repeat step 2 to 4. Congratulations! You can now enjoy the benefits of your VTECH multi-Handset system. 6 Registration
6
Enter Base ID Code
1.
After charging the Handset, remove
it from its Charge Cradle, the
screen will display:
2.
Press
NEW
, then enter the 15 digit
Base Unit ID code, located on the
underside of the Base Unit.
3.
Press
OK
. The Handset will display:
PLEASE WAIT!!
4.
Wait approximately 15 seconds.
The Handset will display:
FOUND BASE
If the Handset displays:
BASE
BUSY
TRY LATER
, this indicates
that the system is in use.
Wait until
the Base Unit is in the idle (on
hook) mode, and repeat step 2 to
4.
Congratulations!
You can now enjoy the
benefits of your
VTECH
multi-Handset
system.
Registration
Getting Started