Vtech 9127 User Guide - Page 19

OPTIONAL HEADSET INSTALLATION Your VT9127 cordless telephone is equipped with a 2.5mm Headset Jack for use with an optional accessory Headset for hands-free operation. If you choose to use the Headset option, you must do the following: INSTALLATION * Obtain an optional accessory Headset, which is compatible with the VT9127. Please contact VTECH Communications Customer Service, in the U.S. toll-free at 1-800-595-9511. In Canada, call 1-800-267-7377 for dealer information in your local area. You can also purchase a compatible Headset directly from VTECH Communications Customer Service. * Once you have a compatible 2.5mm Headset, locate the Headset Jack on the Handset of your VT9127. Connect the plug on the Headset to the jack on the cordless Handset(under a small rubber flap). The plug should fit securely. Do not force the connection. See illustration. OPERATION NOTE: Whenever a compatible Headset is connected to the cordless Handset, the microphone on the Handset will be MUTED. This is done to limit the effect of background noise. BELT CLIP * The VT9127 is also equipped with a detachable belt clip. Align the pins on the inside edge of the belt clip with the notches on the side of the VT9127 Handset. The belt clip should snap securely into place. Do not force the connection. See illustration. * To remove the belt clip, pry it away from either side, where the pins are secured in the Handset notches. Do NOT pull up from the bottom of the clip!!! 19 ADVANCED OPERATION