Vtech Bubbles the Learning Whale User Manual - Page 6

Product Assembly PRODUCT ASSEMBLY 1. Carefully fill the bubble reservoir with bubble solution. Do not overfill as this may cause the bubble solution to spill. Do not dilute the bubble solution, using concentrated bubble solution will produce the best bubbles (bubble solution not included). 2. Choose a surface on the wall surrounding the tub where the suction cup support unit can be mounted securely. The area should be clean and dry before suctioning the unit to the wall. For better suction, we suggest wetting the suction cups before attaching them to the wall. Press the suction cups onto the wall and flip the tabs out to secure the suction cup support unit. Once the unit is attached to the wall, test the strength of the suction by pulling gently on the unit. The suction cups may not stick properly to textured tiles. We recommend that the unit be removed from the wall after each use as the strength of the suction cups cannot support prolonged use. 5