Vtech CS6319 User Manual - Page 19

Telephone operation Mute The mute function allows you to hear the other party but the other party cannot hear you. 1. During a call, press MUTE/REMOVE on the handset. The handset screen shows MUTED for a few seconds and MUTE appears until the mute function is turned off. 2. Press MUTE/REMOVE again to resume the conversation. The handset screen temporarily shows MICROPHONE ON. MUTED 3:15PM MUTE 12/25 Temporary ringer silencing When the telephone is ringing, you can temporarily silence the ringer of the handset without disconnecting the call. The next call rings normally at the preset volume. To silence the handset ringer: • Press OFF/CLEAR or MUTE/REMOVE, RINGER MUTED and display. RINGER MUTED Temporary tone dialing If you have pulse (rotary) service only, you can switch from pulse to tone dialing temporarily during a call. This is useful if you need to send touch-tone signals to access your telephone banking or long distance services. 1. During a call, press TONE . 2. Use the dialing keys to enter the relevant number. The telephone sends touch-tone signals. 3. The telephone automatically returns to pulse dialing mode after you end the call. Find handset Use this feature to page all system handsets. 1. Press /FIND HANDSET on the telephone base. All idle handsets ring and the screens show ** PAGING **. 2. To end paging, press /FLASH, , any dialing keys (0- 9, #, TONE ) on the handset, or press /FIND HANDSET on the telephone base. Paging rings all the registered handsets even if the ringer volume is set to off. 15