Vtech CS6529-4B Quick Start Guide - Page 1
Vtech CS6529-4B Manual
View all Vtech CS6529-4B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Quick start guide CS6529/CS6529-14/CS6529-15/CS6529-16/ CS6529-17/CS6529-19/CS6529-2/ CS6529-25/CS6529-26/CS6529-3/ CS6529-4/CS6529-4B Introduction This quick start guide provides you with the basic installation and setup instructions. A limited set of features are described in abbreviated form. You may refer to the Abridged user's manual provided in the product package for installation and operation instructions, or see the online Complete user's manual at www.vtechphones.com for complete installation and operation instructions. Telephone base and charger installation Install the telephone base and charger as shown below. Telephone wall jack Electrical outlet (not controlled by a wall switch) Telephone base power adapter A DSL filter (not included) is required if you have DSL high-speed Internet service. The DSL filter must be plugged into the telephone wall jack. Telephone line cord Telephone base Electrical outlet (not controlled by a wall switch) Charger adapter Charger • Use only the power adapters and batteries supplied with this product. • If you subscribe to telephone service from a cable company or a VoIP service provider, contact your cable/ VoIP service provider for more information. Battery installation and charging Install the battery as shown below. Once you have installed the battery, you may be able to make and receive short calls. For best performance, charge the handset battery continuously for at least 11 hours. 1. Plug the battery connector securely into the socket. 2. Place the battery with the label THIS SIDE UP facing up and the wires inside the battery compartment. 3. Slide the battery compartment cover towards the center of the handset until it clicks into place. 4. Place the handset in the telephone base or charger to charge. IMPORTANT: Check for a dial tone by pressing . If you hear a dial tone, the installation is successful. If you do not hear a dial tone: • Make sure the installation procedures described above are properly done. • It may be a wiring problem. If you have changed your telephone service to digital service from a cable company or a VoIP service provider, the telephone line may need to be rewired to allow all existing telephone jacks to work. Contact your cable/VoIP service provider for more information. Enter the handset menu 1. Press MENU. 2. Press or until the screen displays the desired feature menu. 3. Press SELECT. • To return to the previous menu, press CANCEL. • To return to idle mode, press and hold CANCEL. Set date and time 1. Press MENU. 2. Scroll to Set date/time, then press SELECT. 3. Use the dialing keys (0-9) to enter the month, date and year and then press SELECT. 4. Use the dialing keys (0-9) to enter the hour and minute. Press or to select AM or PM. 5. Press SELECT. Set number of rings You can set the answering system to answer an incoming call after two, three, four, five or six rings; or toll saver. With toll saver selected, the answering system answers after two rings when you have new messages, or after four rings when you have no new messages. 1. Press MENU. 2. Scroll to Answering sys, then press SELECT. 3. Scroll to Ans sys setup, then press SELECT. 4. Scroll to # of rings, then press SELECT. 5. Press or to choose 6, 5, 4, 3, 2 or Toll saver, then press SELECT. Record your own announcement You can use the preset announcement to answer calls, or replace it with your own recorded announcement. The announcement can be up to 90 seconds in length. 1. Press MENU. 2. Scroll to Answering sys, then press SELECT twice. 3. Press 7 to record. 4. Speak towards the microphone after the handset announces, "Record after the tone. Press 5 when you are done." 5. Press 5 when finished. IMPORTANT! Refer to the online Complete user's manual for a full set of installation and operation instructions. For manual download or customer service, visit our website at www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call 1 (800) 267-7377. Copyright © 2015 for VTech Communications, Inc. All rights reserved. Printed in China. 96-010377-010-100