Vtech CS6719-16 User Manual - Page 31

Quiet mode off The quiet mode is turned off. Quiet mode on The quiet mode is turned on. Registering... The handset registration is in progress. Ringer muted The handset ringer is muted temporarily during an incoming call. Ringer off Saved The handset ringer is turned off. Your selection has been saved. Speaker The handset speakerphone is in use. To register Screen display on HS... a non-registered ...see manual handset. Transferred You have transferred an outside call to another cordless handset. Unable to call The handset is out of range while on a call. Failed phone call (the telephone line is in use). Failed intercom call (there are already two handsets being used). XX missed calls There are new calls in the caller ID log. ** Paging ** All system handsets are being paged. Frequently asked questions Below are the questions most frequently asked about the cordless telephone. If you cannot find the answer to your question, visit our website at www.vtechphones.com or call 1 (800) 595-9511 for customer service. My telephone does not work at all. The display shows No line. I cannot hear the dial tone. Make sure the telephone base is installed properly, and battery is installed and charged correctly. For optimum daily performance, return the handset to the telephone base after use. Disconnect the telephone line cord from your telephone and connect it to another telephone. If there is no dial tone on that other telephone either, then the telephone line cord may be defective. Try installing a new telephone line cord. If changing telephone line cord does not help, the wall jack (or the wiring to this wall jack) may be defective. Contact your telephone service provider. You may be using a new cable or VoIP service, the existing telephone jacks in your home may no longer work. Contact your service provider for solutions. 25