Vtech Cruise 'n Learn Driver User Manual - Page 4

WE DO NOT RECOMMEND THE USE OF RECHARGEABLE BATTERIES. NOTE: If for any reason the program/activity stops working, please follow these steps: 1. Turn the unit OFF. 2. Interrupt the power supply by removing the batteries. 3. Let the unit stand for a few minutes, then replace the batteries. 4. Turn the unit ON. The unit should now be ready to play again. If the problem persists, please call our Consumer Services Department at 1-800-521-2010 in the U.S. or 1-800-267-7377 in Canada, and a service representative will be happy to help you. TO BEGIN PLAY 1. To turn the unit ON, turn the ON/OFF/MODE SELECTOR to the TALKING MODE ( ) or the MUSIC MODE ( ) position. 2. To adjust the volume, slide the VOLUME CONTROL SWITCH located on the bottom of the unit to the ( ) position for LOW VOLUME or the ( VOLUME. ) position for HIGH • 3. To turn the unit OFF, turn the ON/OFF/MODE SELECTOR to the OFF ( ) position. Untitled-3 4 4-5 ACTIVITIES A. Talking Mode 1. Turn the ON/OFF/MODE SELECTOR to the TALKING MODE ( ) position. You will hear "Buckle up!" followed by a startup engine and a revving engine sound effect. All the lights will flash with the sound. "Buckle up!" + engine sound + revving sound 2. Turn the STEERING WHEEL to the left or the right. The signal light will flash in the direction the steering wheel is turned, and Lucky will drive back and forth on the road. When the car stops in front of one of the four location buttons you will hear a barking sound effect followed by a fun phrase related to the location. The traffic lights will flash with the sound. 3. Turn the STEERING WHEEL to the left or the right for approximately ten seconds. The yellow light will light up and you will hear a squealing tire sound effect, then the red light will light up and you will hear "Red light, Stop!" The green light will light up and you will hear "Green light, Go!" and a revving engine sound effect. "Red light, stop!" 5 8/20/02, 11:33 AM