Vtech Go Go Smart Wheels Choo-Choo Train Playset User Manual - Page 8

ACTIVITIES - MOTORIZED TRAIN ENGINE Activities 1. Slide the OFF/MODE SELECTOR SWITCH to turn the unit ON. You will hear train sounds, a song and a phrase. The train will move forward automatically when it's in Motor Play Mode (Note: The train's back wheels need to be on a firm surface in order to trigger the motor.) The light will flash with the sounds. MOTOR 2. In Motor Play Mode, the motor will stop automatically two seconds after you remove the train from the tracks. The motor will restart once the train is put back down. 3. Press the LIGHT-UP BUTTON to hear train sounds, songs and phrases. Press and hold the LIGHT-UP BUTTON to stop the motor while in the Motor Play Mode. The motor will restart after the button is released. The light will flash with the sounds. 4. While in the Manual Play Mode, push the train over the two SmartPointTM locations included in the playset to hear greetings and fun sounds. The light will flash with the sounds. The train also interacts with SmartPointTM locations on other VTech® Go! Go! Smart Wheels® playsets (each playset sold separately). 5. While in the Motor Play Mode, let the train run through the SmartPointTM locations to hear greetings, and fun sounds. 6. While the motor is off, if there is no input after approximately 8 seconds, you will hear an invitation and a sound effect. After another 8 seconds of no input, a song will play. If there is no input for an additional 8 seconds, the unit will play a short tune and then go into sleep mode. While the motor is running, you'll hear the train whistle, then the train will enter sleep mode after 5 minutes of no input. The train can be re-activated by pressing the light-up button or pushing the train quickly. 8