Vtech Jungle Gym: Ride & Learn Giraffe Bike User Manual - Page 7
Assembly Instructions - pedal bounce
View all Vtech Jungle Gym: Ride & Learn Giraffe Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Assembly Instructions 1. To attach the neck to the head, insert the neck into the slot at the bottom of the head. You will hear a loud 'click' sound. This indicates that the head is securely fixed into the neck. 2. To attach the neck to the body, use a screwdriver to loosen the long screw attached to the front of the body. Pull the long screw out. Insert the neck into the slot on the body. You will hear a loud 'click' sound. This indicates that the neck is securely fixed into the body. Push the long screw into the hole and tighten the screw with a screwdriver. 3. To attach the pedals to the body, insert them into the holes on the sides of the body. You will hear a loud 'click' sound. This indicates that the pedals are securely fixed into the body. 4. To attach the bouncing seat to the body, first unlock the seat peg by moving the latch to the unlock position and pulling out the seat peg. Insert the seat into the slot on the top of the body. Set the seat height by inserting the peg into the holes in the seat. The seat has two different height positions. After inserting the piece into its proper position, you will hear a click to let you know the piece is secure.