Vtech LS6325-3 User Manual (LS6325-3 User Manual) - Page 33

Telephone operation PTT to all handsets You can connect a PTT call from a single handset to all available system handsets. 1. You have four ways to begin a PTT-to-all call: • Press and hold PUSH TO TALK when the handset is not in use. • Press PUSH TO TALK when the handset is not in use. Then press TONE . • If you have more than two handsets, press PUSH TO TALK when the handset is not in use. Press / VOL or VOL/CID to highlight >All Handsets, then press MENU/SELECT or PUSH TO TALK. • If you have more than two handsets: a) Press MENU/SELECT when the handset is not in use. b) Press / VOL or VOL/CID to highlight >Push to talk, then press MENU/SELECT. c) Press / VOL or VOL/CID to highlight >All Handsets, then press MENU/SELECT or PUSH TO TALK. Your handset displays Connecting to All Handsets... for a few seconds. When the connection is made, all handsets display Press and hold [PTT] to talk and beep once. 2. Press and hold PUSH TO TALK on your handset. A chirp indicates your microphone is on. Speak toward the handset. Your voice is broadcast to all destination handsets. While you are speaking, your handset screen shows PTT To HANDSET X (X represents the destination handset numbers; a maximum of four handset numbers appear). 3. Release PUSH TO TALK after speaking. All handsets beep once again. After the handsets beep, you can press and hold PUSH TO TALK to continue speaking or the destination handsets can respond (see Answer PTT on page 30). 4. To end the PTT call, press OFF/CLEAR or place the handset in the telephone base or charger. The handset screen shows Push to talk Ended for a few seconds. After PUSH TO TALK is released, the PTT call remains open for a short time. If no one presses PUSH TO TALK within 10 seconds, the PTT call ends automatically. 29