Vtech SL82218 User Manual - Page 33

Telephone operation Call transfer using intercom Models SL82318/SL82418/SL82518/SL82558/ SL82658 1. While on an outside call, press INT. The screen will display TRANSFER TO: 2. Enter a handset number, 1-9 or *0-*2. The transferring set's screen will show CALLING HANDSET X. The called handset will ring, and its screen will show HANDSET X IS CALLING. 3. On the ringing handset, press PHONE/FLASH, INT, SPEAKER, or any dial pad key (0-9, * or #) to answer the intercom call. You can now talk without the outside caller hearing the conversation. 4. Press OFF/CLEAR on the transferring handset or place it in the telephone base or handset charger to complete the transfer. The transferring handset's screen will show CALL TRANSFERED and the other handset will automatically be connected to the outside call. NOTES: 1. Before the intercom call is answered, you can cancel the transfer and return to the outside call by pressing OFF/CLEAR, PHONE/FLASH, or INT. 2. If the called handset does not answer the intercom call within 100 seconds, is in directory or caller ID history mode or is or out of range, the transferring handset will show UNABLE TO CALL TRY AGAIN on its screen and will automatically return to the outside call. 3. You can switch between the intercom call and the outside call by pressing INT on the transferring handset. The display will change between INTERCOM and OUTSIDE CALL to indicate which call is active. 4. You can end the intercom call and return to the outside call by pressing PHONE/FLASH on the transferring handset. 5. If you register two or more accessory handsets (for a total of three or more), the feature of call transfer using intercom will be the same as models SL82318/SL82418/SL82518/ SL82558/SL82658. If you want to transfer the call to handset 10, 11 or 12, enter the handset number as *0, *1 or *2 respectively on the calling handset. 30