Vtech SN5127 User Manual - Page 14
Battery backup mode
View all Vtech SN5127 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Battery indicators Battery status The screen is blank, or displays Place in charger and flashes. The battery has no or very little charge. The handset cannot be used. Action Charge without interruption (at least 30 minutes). The screen displays Low battery and flashes. The battery has enough charge to be used for a short time. Charge without interruption (about 30 minutes). The screen displays HANDSET X. The battery is charged. To keep the battery charged, place it in the charging cradle when not in use. When the battery is fully charged, you can expect the following performance: Operation While in use (talking*) While in speakerphone mode (talking*) While not in use (standby**) Operating time Up to 7 hours Up to 3.5 hours Up to 5 days * Operating times vary depending on your actual use and the age of the battery. ** Handset is not charging nor in use. Battery backup mode When there is a power failure, the handset displays Put HS on base to power base and Out of range OR No pwr at base alternately. Put the charged handset in the telephone base to back up the telephone base power for some basic phone operations for a short period of time. During this period, you cannot use the answering system. When the handset is put in the telephone base, it displays Powering base... Don't pick up. You may use the handset for making or answering calls via the handset speakerphone, but do not pick up the handset while using it. If you have more than one handset, all handsets display Pwr outage mode after entering the battery backup mode. At this time, use other handsets for some basic phone operations. 8